16 © 2011 HAMILTON – INSTRUCTION MANUAL
4. Pilot functions
Deleting a block log
. In position (p1) turn the crown to access the display
“Lo Run”.
. A short press of button A allows choice of the
number of the block to be deleted.
. Pull the crown out to position (p2). The display
indicates “CLEAr” and the block number.
. A long press on button A causes the display to ash
and deletes the chosen block.
NB: If the total “to” is chosen, a long press on
button A denitively deletes all the memorized logs.
. Push the crown back to position (p1) to return to
the basic display. The block numbers remaining are
shifted. In case of total deletion, the display is returned
entirely to zero.
4.4 Adjusting the time zone “UTC”
. In position (p1) turn the crown to access the display
“UTC” (Universal Coordinated Time).
. Pull the crown out to position (p2). The hours and
minutes display ashes.
. Turn the crown to adjust the values.
. Press button
B
to switch between hours and minutes.
. Push the crown back to position (p1) to conrm the
settings.
To Next Page
Loading...
Need help?
General