12 © 2011 HAMILTON – INSTRUCTION MANUAL
3. Instructions for use
3.14 Countdown “TM”
The maximum countdown time it is possible to program
is 99 hours, 59 minutes and 59 seconds.
Programing
. In position (p1) turn the crown to access the display
“ TM”.
. Pull the crown out to position (p2). The time display
ashes.
. Turn the crown to adjust the values.
. Press button
B
to switch between hours, minutes
and seconds.
. Push the crown back to position (p1) to conrm the
settings.
Starting the countdown
. A short press on button A starts the countdown.
. A further press on button A stops the countdown.
. A third press on button A restarts the countdown
without resetting it to zero.
A beep sounds at each press on the button.
. At the end of the countdown, the display “TM” ashes
and a ringtone sounds for twenty seconds.
. A short press on button B reactivates the last
programing.