Hamlet HBCS2D100US User Manual

5 Lighting and Aiming
5.1 Lingting
Lighting for shooting photography to provide auxiliary lighting, beam exposure to the reading target, to
improve reading performance and adaptability to weak ambient light. The user can set it to one of the following
depending on the application environment:
Normal (default setting): The light is on when taking a picture, and off at other times.
Always: The light is on after the module is switched on.
No lighting :The lighting does not illuminate under any circumstances.
*Normal
Always
No lighting
5.2 Aiming
The aiming beam projected by the HBCS2D100U helps you find the best reading distance while shooting. Users
can choose any of the following modes depending on the application environment.
Normal (default setting): The reader projects the aiming beam only during photographing.
Steady on: After the reader is powered on, it continuously projects the aiming beam.
None Aiming: In any case, the aiming beam is extinguished.
* Normal
Steady on
None Aiming

Hamlet HBCS2D100US Specifications

General

Brand	Hamlet
Model	HBCS2D100US
Category	Barcode Reader
Language	English