Hamlet HBCS2D100US - USB HID Interface; HID Parameter Configuration

2.2 USB HID Interface
When the reader module is connected to the host using a USB cable, the reader module can be configured
as a HID device by scanning the following setup code.
USB HID device
When the device is used as a HID device, it can be 2 different devices. Configure the following settings.
2.2.1 HID parameter configuration
You can also modify the PC's access cycle to the HID device by scanning the following setup code.
* 1ms
3ms
5ms
10ms
You can also modify the interval between valid message and release message of the device by scanning
the following setting codes.
* 0ms
1ms
5ms