14 Appendix F: Save or Cancel
After reading the data code to scan the "save" setting code to read the data saved. If you make a mistake while
reading the data code, you can cancel reading the wrong data.
Such as reading a setting code and reading the data "A", "B", "C" and "D" in sequence, if "one data before last
reading" is read, the last read The number "D" will cancel the read data "ABCD" if "Cancel a previous data string" is
read, and cancel the read data "ABCD" if "Unchanged data setting" is read and exit the modification Set.
Cancel the previous read a
data
Cancel the previous read a
bunch of data
Cancel to change the setting
To Previous Page
Loading...
