8.11 CodeBar
Read the following setting code, CodeBar bar code to enable / disable the reading set.
Not allow to read CodeBar
Read the following setting code, the CodeBar bar code to allow / prohibit to send start and stop set.
Send CodeBar start and end
* Does not send CodeBar
start and end breaks
Read the following setting code, set the minimum length of CodeBar reader.
The minimum length of
CodeBar information is 0
* The minimum length of
CodeBar information is 4
Read the following setting code, will set the maximum length of CodeBar barcode reader.
* The maximum length of
CodeBar information is 32
The maximum length of a
CodeBar message is 255
To Next Page
Loading...
