Hammer N2-38 - Declaration of Conformity

12
Hall in Tirol, 21.01.2021 Prof. h.c. Ing. Johann Georg Felder
CEO FELDER KG
KR-Felder-Straße 1, 6060 Hall in Tirol, AUSTRIA
Bandsaw
N2-38 / N3800 / N4400
Manufacturer: Felder KG
KR-Felder-Straße 1, 6060 Hall in Tirol, AUSTRIA
Product designation: Bandsaw
Make: HAMMER
Model designation: N2-38 / N3800 / N4400
The following EC guidelines were applied: 2006/42/EC
2014/30/EU
The following harmonised norms were applied: EN ISO 1807-1: 2013
EN 60204-1: 2018
EN ISO 12100: 2010
The prototype test was carried out by: CEPROM® S.A.
Product Certification Body
NB 1802
Str.Fântânele f.n
RO-440237 Satu Mare
Conformity with the EC Machine Guidelines certified by: EG-Design Test Certificate No. 212-ET-12021
3 Declaration of Conformity
Declaration of Conformity
This EC Declaration of Conformity is valid only if the CE label has been affixed to the machine.
Modifying or altering the machine without the express written agreement of the manufacturer shall render the war-
ranty null and void.
The signatory of this statement is the appointed agent for
the compilation of the technical information
Note: Machine number
The machine number of this machine will be printed on the cover sheet of this operating manual.
EG-Declaration of Conformity
According to Machine Guidelines 2006/42/EG
We hereby declare that the machine indicated below, which corresponds to the design and construction of the model
we placed on the market, conforms with the health and safety requirements as stated by the EC guidelines (see table).