Hammond B-3 - Attach the Leslie Speed Switch; Attach the MAIN;ECHO Switch (Optional)

Introduction
17
Attach the Leslie Speed Switch Attach the MAIN/ECHO Switch
(optional)
1. Remove the 2 inside knob screws on the front left of the
Great Manual.
2. Put the spacer on the plate of the Leslie Speed Switch.
3. Attach the Leslie Speed Switch on the organ with the knob
screws.
4. Insert the plug of the Leslie Speed Switch cable to the
LESLIE SWITCH jack on the volume panel.
1. Remove the 2 outside knob screws on the front left of the
Great Manual.
2. Put the spacer on the plate of the Main/Echo switch.
3. Attach the Main/Echo switch on the organ with the knob
screws.
4. Insert the plug of the Main/Echo switch cable to the
MAIN/ECHO jack on the volume panel.