Setting Up
57
EQUALIZER, REVERB
The Equalizer and the Reverb add a final touch to the tone.
The Equalizer regulates the tonal quality. The Reverb adds the effect of playing in a
concert hall.
You control their basic functions on the panel under the left side of the keydesk.
Equalizer
Reverb
[BASS] Knob
BASS is assigned here at the time of shipment from the factory. This increases/decreases the bass
sound. About ±9dB is adjustable at 100Hz.
[TREBLE] Knob
TONE is assigned here at the time of shipment from the factory. It increases/decreases the treble
sound. About -9 to +3dB is adjustable at 10kHz.
NOTE: The Equalizer actually has 3 bands and 1 tonal function, and one function is assignable to each
BASS, TREBLE knob. (P. 88)
NOTE: The “Tone” function here refers to the unique internal control on the vintage B-3 that gently cut the
treble. This is a different function than the “Treble” EQ.
[REVERB] Knob
This is for controlling the depth of the reverb effect. It gives no reverb effect at full counter-clockwise.
The reverb gets deeper as it is turned further clockwise.
NOTE: You can finely set the reverb. (P. 89)
To Next Page
Loading...
