Hammond XPK-100 User Manual

5
Introduction
Hammond XPK-100 Quick Features Guide
Ë Basic Controls
The basic controls on your Hammond XPK-100 include the Switches and an Information Center Display.
Ë Switches
Switches are the large buttons on either side of the Information Center Display. The basic functions of
these Switches are:
1. Turning something "ON" or "OFF.”
2. Modification of parameters - increasing or decreasing.
3. Selecting among multiple functions.
4. Confirmation - YES, NO or OK.
PLAY/EDIT Switch
Your Hammond XPK-100 has two modes - PLAY Mode and EDIT Mode. This Switch allows
you to switch between the two modes.
NOTE: More information about Modes is covered in the section, *Information Center Display” starting on
page 5.
PRESET/EDIT NUMBER Switches
These two Switches are located to the left of the Information Center
Display. They function in two ways:
PLAY Mode - The two Switches allow you to scroll through and
select the Preset number you want.
EDIT Mode - The two Switches allow you to scroll through and select the Advanced Feature you
want.
NOTE: More information about Modes & Advanced Features is covered later in this Guide.
TRANSPOSE/LOCK Switch
This Switch allows you to change the key in which the XPK-100 will sound, as well as
to “lock” the control panel so that you will not accidentally change a setting during
performance.
NOTE: The LOCK Feature is explained in detail starting on page 32.
CONTROL Switch
This Switch allows you to add different effects, such Leslie Slow/Fast, Pedal Sustain, etc.,
during performance. Its function can be determined via the Advanced Feature Menu.
NOTE: The “CONTROL Sw. Function” Advanced Feature is explained in detail starting on page 22.

Hammond XPK-100 Specifications

General

Brand	Hammond
Model	XPK-100
Category	Music Pedal
Language	English