Technical specifications
42
Operating force
Control force < 60 N
Resetting automatic fuse < 60 N
Electronic switches < 15 N
Parking brake < 60 N
Inserting charging plug < 60 N
Technical data
Diameter front wheel 260 x 85 mm
Diameter drive wheels 260 x 85 mm
Tire pressure wheels 350 kPa (3.5 Bar)
Batteries
Maximum dimensions batteries 210 x 175 x 180 mm
Weight scooter without batteries 78 kg 82 kg
3
Battery capacity 30 Ah/5,5A-5h
40 Ah/6.8A-5h
Maximum permissible charging voltage 13.6 V
Maximum charging current 5 A
Connector type A DIN 72311
3. Applicable to Calypso 4-wheel version.
8.2 Approval
The product meets:
1. NEN-EN 12182 Technical tools for the handicapped - General standards and
testing methods October 1997.
2. NEN-EN 12184 Electrically driven wheelchairs, scooters and associated charging
equipment - Standards and testing methods April 1999.
3. The Calypso 3-wheel scooter is classified according to EN12184 in
class A & B.
4. The Calypso 4-wheel scooter is classified according to EN 12184 in
class B.
5. ISO 7176-8 Requirements and test methods for impact, static, and fatigue strength
July 1998.
6. ISO 7176-9 climate tests for electric wheelchairs & scooters.
7. ISO 7176-14 Standards and test methods for controller systems of electrically
driven wheelchairs 1997.
8. ISO 7176-16 Requirements of resistance to fire May 1997.
The quality is guaranteed by an independent institution who controls the fulfilment of
the above mentioned standards.
To Next Page
Loading...
