31
air relative humidity: less than 90%（20℃）.
Altitude should not exceed 2000m.
22) After power off, brake works and the
．．．．．．．．．．．．．．．．．．． ．．．．．．．．．．．
truck can not be towed(dragged)
．．．．．．．．．．．．．．．．．．．．．．．．．．．
23) As to stand
．．．．．．．．．
-
．
on truck, stand on firmly
．．．．．．．．．．．．．．．．．．．．．
and hold the handle tightly. When
．．． ．．．． ．．． ．．．．．． ．．．．．．．． ．．．．
turning, the speed should be lower
．．．．．．．．．．． ．．．．． ．．．．．． ．． ．．．．．
than 3km/h.
．．．．．．．．．．
24) There’s warning and operation method on
truck label. Please obey the requirement
in this manual and the truck label when
operation. Check label, identification plate,
replace damaged or fallen ones.
25) Fire extinguisher shall be equipped at the
work site. Users can choose truck
equipped with fire extinguisher. Driver and
manger should be familiar with the fire
extinguisher position and application
method.
26) Use tray when carrying small items, do
not place on the fork directly
27) Do not wash the inner of the truck, do not
place the truck outdoors and exposed to
the rain.
28) Before dismantle or repair the truck,
remove the battery plug firstly.
29) The truck should be used under the
environment of the light is enough.
30) Only in the event that the truck
manufacturer is no longer in business and
there is no successor in the interest to the
business, may the user arrange for a
modification or alteration to a powered
industrial truck, however, that the user
must do the following:
– Arrange for the modification or
alteration to be designed, tested
and implemented by an
engineer(s)；
– Maintain a permanent record of the
design, test(s) and implementation of the
modification or alteration;
– Make appropriate changes to the capacity
plate(s), decals, tags and instruction
manual;
– Affix a permanent and readily visible label
to the truck stating the manner in which
the truck has been modified or altered,
together with the date of the modification
or alteration and the name and address of
the organization that accomplished those
tasks.
To Next Page
Loading...
