69
9 Relevant safety directive or standard (CE)
After CE certificated, the truck meets the following directive and standard:
– 2006/42/EC machinery directive（namely Directive of the council of the laws of the member
states concerning machinery）, 2000/14/EC Noise Directive（Namely Directive of the council
of the laws of the member states concerning noise radiation of outdoor equipment）;
– EN ISO3691-1:2015 Industrial trucks
—
Safety requirements and verification
—
Part 1:
Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and
burden-carrier trucks
EN16307-1:2013+A1:2015 (Industrial trucks. Safety requirements and verification.
Supplementary requirements for self-propelled industrial trucks, other than driverless trucks,
variable-reach trucks and burden-carrier trucks)
– EN1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General
requirements for battery powered trucks, EN1726-1:199 Safety standard for machinery
industrial vehicle, EN1757-2:2001 harmonized standard;
– Main safety elements are in accordance with 2006/42/EC machinery directive as well as
EN1175-1:1998+A1:2010, EN1726-1:1998, EN1757-2:2001 standard;
Electronic components design and manufacture meet low-voltage apparatus directive
2006/95/EC;
Noise is calculated according to EN12053:2001+A1:2008：pallet truck noise, sound pressure
value
Lifting: right ear73.4dB, left ear72.5dB
Going forward: right ear72.4dB, left ear71.5dB
– Vibration data are according to the EN13059:2002+A1:2008 Safety of industrial trucks - Test
methods for measuring vibration, determined by ISO5349-2:2001, ISO2631-1:1997standard,
meet 2002/44/EC directive：handle vibration amplitude is 0.2977m/s
2
.
– Electromagnetic compatibility is calculated according to EN12895:2000 and meet
2004/108/EC directive.
To Next Page
Loading...
