46
10) Brake system
When the truck run forward or backward, push
the handle to vertical position or press to level
position to check the brake condition.
11) Steering system
Left or right turn the handle to make the truck
run around 3 turns, and then check if the
steering system is normal.
12) Check chain tensity
– Lift forks up 10～15cm.
– Press the middle of the chain and see if
the left & right tensity is the same.
– Tensity adjustment：screw off the nut①,
adjust nut ② to keep the same tensity of
the two chains, and then tighten the nut
①.
13) Horn
Press the horn button to check sound.
14) Appearance
Check the truck appearance for clean, rust or
paint spalling.
15) Others
Check whether there is any abnormal noise,
whether wiring is regular or fastener loosens
etc.
To Next Page
Loading...
