60
Lifting assembly
Service
item
Service required Tools D W M T S
Chain & chain wheel
Check chain for tension, damage or
rust
〇 〇 〇 〇 〇
Add lubrication for chains
〇 〇 〇
Check chain wheel for deformation or
damage
〇 〇 〇
Check chain wheel bearing for
looseness
〇 〇 〇
Pin shaft lubrication 〇 〇 〇
Lifting cylinder
Check piston rod, rod screw and
connection for looseness, deformation
or damage
Test
hammer
〇 〇 〇 〇 〇
Check for operation 〇 〇 〇 〇 〇
Check for oil leak 〇 〇 〇 〇 〇
Check lifting cylinder fixed bolt for
looseness.
〇 〇
Mast & fork carriage
Check welded parts of beam and
outer and inner masts for defective,
cracks or damage
〇 〇 〇
Check outer and inner masts for
defective weld, cracks or damage
〇 〇 〇
Check for defective weld, cracks or
damage of fork carriage
〇 〇 〇
Check roller bearings for looseness 〇 〇 〇
Check rollers, roller pins and welded
parts for cracks or damage
〇 〇 〇
Fork
deformation or wear
〇 〇 〇
Check fork base and hook welding for
defective cracks or wear
〇 〇 〇
To Next Page