HANGCHA CDD12-AC1 - Page 68

64
Replace hydraulic oil
– Park the truck at level ground.
– Wipe off oil add and drain plug.
– Unscrew oil add plug（48）
– Place an appropriate container under oil
drain plug(49), unscrew oil drain plug(49),
and drain the oil to the container.
– After oil in the reduction box drains,
re-tighten the drain plug（49）
– Add appointed gear oil （ L- HM32 ） to
allowable scale range. In order to add oil
easily, add with help of funnel and tube.
– Re-tighten oil add plug(48), and clean the
residual oil on the reduction box surface.
WARNING
 Handle the exhaust oil according to
relevant rules of the state and never
dump at will.
49
48
49
48
48
OIL
49