9
Service Counter
Press to move to (Reset Service Counter):
no
Pressing
marks „no“ in the second line.
By further pressing the
button, you can choose between
"no/yes“.
no
yes
If "Yes" is selected, the service time counter is set to the de-
fault value.
IP-Address
Press to move to (Enter IP address):
IP -A d d re s s
1 6 9 .2 54.100 .0 95
Pressing
marks number/symbol in the second line.
By further pressing the
button the numbered block is
incremented:
IP -A d d re s s
1 6 9 .2 54.100 .0 95
By pressing , you move to the next number block:
IP -A d d re s s
1 6 9 .2 54.100 .0 95
If the mark disappears after a few seconds, the value is accepted.
The final transfer to the control memory only takes place when
the setting menu is exited via the button or via a cold start.
Subnet-Address
Press to move to (Enter Subnet Address):
S u b n e t
2 5 5 .2 5 5 .0 0 0 .0 0 0
Pressing
marks number/symbol in the second line.
By further pressing the
button the numbered block is
incremented:
S u b n e t
2 5 5 .2 5 5 .0 0 0 .0 0 0
By pressing , you move to the next number block:
S u b n e t
2 5 5 .2 5 5 .0 0 0 .0 0 0
If the mark disappears after a few seconds, the value is accepted.
The final transfer to the control memory only takes place when
the setting menu is exited via the button or via a cold start.
Gateway-Address
Press to move to (Enter Gateway address):
G a te w a y
1 6 9 .2 54. 1 0 0.1 00
Pressing
marks number/symbol in the second line.
By further pressing the
button the numbered block is
incremented:
G a te w a y
1 6 9 .2 54. 1 0 0.1 00
By pressing , you move to the next number block:
G a te w a y
1 6 9 .2 54. 1 0 0.1 00
If the mark disappears after a few seconds, the value is accepted.
Press again briefly to return to "Basic menu", or after 2
minutes and 30 seconds.
The final transfer to the control memory only takes place when
the setting menu is exited via the button or via a cold start.
To Next Page
Loading...
Need help?
General
