17
If the log space is full (500 records), “FULL LOG” message will be
displayed and no more data will be saved.
When LOG is pressed, a complete set of information is stored: date, time,
EC, TDS, NaCl, temperature and calibration data.
VIEW LOGGED DATA
Press the ALT&RCL
keys while in measurement mode to retrieve the
stored information.
If no data was logged for the current selected measurement range, one
of the next messages will be displayed:
No EC records:
No TDS records:
No NaCl records:
Otherwise, the instrument will display the memorized data, in according
with the selected range.
• If RCL was entered while in EC measurement range:
To Next Page
Loading...
Need help?
General
