Hanna Instruments HI 2300 User Manual

26
• Use the ARROW keys to set the reading on the secondary LCD to
that of the hot water.
• When the reading is stable and close to the selected
calibration point, the “CFM” tag will blink.
• Press CFM to confirm. The instrument memorize
calibration and restart in measurement mode.
Note: If the reading is not close to the selected calibration point,
“WRONG” tag will blink. Change the EC probe and restart
calibration.
sale@ponpe.com
www.ponpe.com

Hanna Instruments HI 2300 Specifications

General

Brand	Hanna Instruments
Model	HI 2300
Category	Measuring Instruments
Language	English