10
GENErAL DESCriPTiON & iNTENDED uSE
• The Measurement Setup icon ( ), found in measurement screen, opens sensor setup parameters.
• The Log Recall icon ( ) recalls storred log sessions (Automatic continuous logging, Manual, or
Autohold).
5.1. MAIN FEATURES
Measurement & Calibration
• Measure pH/mV (pH) or mV/Rel.mV (ORP) with temperature
• Application-specific profiles allow quick and direct measurement without the need to update the
sensor and system settings
• Active log during measurement
• Measurement stability indicator (using the Stability Criteria setting)
• Reading modes: direct and direct/autohold
• Temperature compensation can be Automatic (using temperature probe) or set manually
• Audible and/or alarm messages for measurements outside of predefined limits
• Galvanic isolation for pH/ORP measurement module
• 5-point pH calibration with automatic recognition for standard buffers (Hanna and NIST buffers)
• Choice of standard or custom buffers for calibration
• Non-volatile memory saves data and settings
Logging
• Data log collection of at least 1 000 000 data points (with time and date stamp)
• Logging types: manual, automatic, autohold
• Sample ID for manual and Autohold data
Connectivity features & services
• Transfer logged data to a USB thumb drive
• Log files that include measurements and calibration data (as .csv file)
• FTP and email for log export via Ethernet and Wi-Fi connection
Help section for meter guidance
• Video support presentation of main features
To Next Page
Loading...
