53
mEASurEmENT & ELECTrODE SETuP mENu
File Name
Option available only with Manual and Autohold logging type selected.
To create a file name from Logging screen:
1. Tap Create.
2. Use the on-screen keypad to enter a file name of maximum 13 characters.
3. Tap Enter on keypad to confirm.
The instrument automatically ends the Manual log file name in _pH_.csv, _mV_.csv, _relmV_.csv
depending on selected reading mode.
Sample ID
Option allows manual and autohold samples to be labeled with an identification.
There are 4 options available: none, a numerical ID that increments with each new sample logged, a
text label, or a text label with numerical ID.
With Increment option selected (tap to select):
1. Tap Sample ID Prefix.
2. Use the on-screen keypad to enter a text prefix, of maximum 15 characters, to the sample name.
3. Tap Enter on keypad to confirm.
4. Select ID number from scrollable list.
10.7. PROFILES
Options: Save As, Save, Delete
A profile is a sensor setup complete with required measurement unit, temperature unit, display
preference, and alarm threshold options.
Once saved the profile can be loaded for applications that require similar configurations.
To Next Page
Loading...
