21
GETTiNG STArTED
• Place the probe into the holder and secure the cable in the cable holder clip.
• Power the unit.
Note: Connectors and plugs must be connected firmly for the system to work correctly.
Connecting a USB-A keyboard
Connect a USB’s keyboard plug into the USB-A input on the back of the unit.
Once connected the keyboard is automatically detected.
8.4. POWERING THE UNIT
After connecting the electrode to the meter:
1. Connect the power adapter to the rear panel of the meter.
2. Connect the power plug into the 24V power socket.
3. Press the black ON/OFF power button located on the back of the meter case, to power the instrument.
At start up, the meter briefly displays the initialization screen (the Hanna Instruments logo,
meter name, and bootloader version).
4. Next, the instrument lauches into a Tutorial.
Tap Skip to opt out from viewing the Tutorial. The Measurement screen opens up.
To Next Page
Loading...
