52
mEASurEmENT & ELECTrODE SETuP mENu
10.6. LOGGING
Options: Logging Type, Sampling Period (Automatic), File Name (Manual and Autohold),
Sample ID (Manual and Autohold)
Logging Type
• Automatic
Measured data is logged automatically at predefined time intervals (i.e. Sampling Period).
A file name is automatically generated:
•
pH log files start with pH. The file is named by year month day, and starting time
e.g., pH_20210329085101
•
Relative mV log files start with relmV e.g., relmV_20210309095704
• Manual
Measured data is logged every time start log icon (
1
) is tapped on display.
• Autohold
Logging type available with Direct/Autohold reading mode selected.
Note: Manual and Autohold records are stored in the same log file, i.e. data logged on different
days is stored in the same lot. Automatic records are stored separately.
Data logged with Autohold option selected, is identified by the H in the Notes column.
Sampling Period
Option available only with Automatic logging type selected.
Time-interval options are selected from scrollable list.
To Next Page
Loading...
