45
mEASurEmENT & ELECTrODE SETuP mENu
Reading Mode
Options: Direct, Direct/Autohold
Tap to select option.
When Direct is selected, the measurement changes and the stability of the measurement is continuously
evaluated. Unstable (blinking) or Stable status idicator are displayed above the progress bar.
When Direct/Autohold is selected, a lock icon ( ) is displayed between the log and Measurement
Menu icons. Tap the icon to initiate an Autohold measurement. Depending on parameter selected, pH
or mV icons will be displayed.
Autohold indicator is displayed blinking above stabilty bar until the measurement is stable.
When stable, the indicator stops blinking and the measurement will freeze at the current value. Tap
the pH or mV (
pH
) icon to return to direct measurement.
10.2. TEMPERATURE
Options: Temperature Source, Temperature Unit, Manual Temperature, Isopotential Point
To Next Page
Loading...
