44
mEASurEmENT & ELECTrODE SETuP mENu
10.1. READING
Options: Parameter, Resolution, Stability Criteria, Reading Mode
Parameter
Options: pH, mV, Rel. mV
Option allows users to configure the meter for pH, mV (ORP), or Rel. mV (ORP with calibration)
measurements.
Configuration is done through direct selection.
See Setup Table Overview for all options.
Resolution
Option allows users to select desired resolution based on selected mode.
See Setup Table Overview for all options.
Stability Criteria
Option allows users to set the stability criterion for selected mode based upon the stability setting
selected.
The stability indicator on the measurement display will show partially while the measurement is
changing, and show a full green bar when the measurement stability criteria has been fulfilled.
• Accurate
Recommended option for applications where high accuracy is required. Measurement is recognized
as stable using more critical criteria evaluating measurement fluctuations.
• Medium
Recommended option for applications where average accuracy is required.
Measurement is recognized as stable using less critical criteria evaluating measurement fluctuations.
The measurement may still change after registering stable.
• Fast
Recommended option for applications where speed of delivery has priority.
To Next Page
Loading...
