H A N S E 3 7 0
6
Preservation
Osmosis protection is ensured by the use of an isophthalic acid gel coat and an isophthalic acid
resin for the hull laminate. In addition, areas of the laminate surfaces heavily exposed to water were
preserved with a top coat.
All parts not consisting of FRP are necessarily colour-preserved or consist of materials that are
corrosion-proof.
An antifouling painting system against incrustation by foreign matter should be applied to the
underwater body.
Deck covering
All areas of the working deck are provided with an anti-slip covering.
Fittings and hatches
All fittings and hatches are made of rustproof, saltwater-proof materials. To securely transfer the
arising forces, reinforcements are laminated into the deck at the places where the fittings are
mounted.
Note: Touching the sea bottom or collisions with objects below the waterline
can result in damage to the hull and thus impair its strength.
To Next Page
Loading...