EasyManua.ls Logo

Hanseatic BF-6A31E4E1G - Installation and Connection; Oven Installation Overview; Installation Site Requirements

Hanseatic BF-6A31E4E1G
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning the oven
Page EN-27
Replacing oven light bulbs
For oven lighting, you need heat-resistant
oven lighting: type 220-240 V ~, 25W, G9,
T 300°C.
WARNING
Risk of electric shock!
Improper replacing of the oven light
bulb may cause electric shock which
can lead to serious injury or even death.
Before replacing the oven bulb, be
sure to switch off the circuit breaker
or unscrew fuses.
Risk of burns!
The cooking compartment can re
-
main hot a long time after it has been
switched off. As a result, there is a risk
of being burnt when touching the cook
-
ing compartment walls or heating unit.
Only change the oven light bulb when
the oven has cooled off completely.
1. Switch off the circuit breakers or unscrew
fuses.
2. Place a soft cloth in the cooled cooking
compartment in the event that the glass
cover falls or the bulb falls off.
3. Unscrew the glass cover anticlockwise
and remove it.
4. Carefully pull the defective bulb out of the
socket and replace it with a new one of
the same type.
5. Insert the glass cover back into the open-
ing and screw it back on clockwise.
6. Remove the cloth from the cooking com-
partment and switch it on again.
7. Set the clock.

Table of Contents

Related product manuals