24
A c t i v a t e d a t x x %
A u d i o o
A c t i v a t e d a t x x %
A u d i o o
A R E A / V O L U M E T R I P
A r e a x
A L A R M S
V o l . r a t e a l a r m
Suggested setting is 10%. For no alarm, set at 0 %.
The beeper can be activated [ on ] or de-activated
[ o ] by pressing the arrow key.
Volume rate alarm for over or under application
for more than 20 seconds.
Suggested setting is 5%. For no alarm, set at 0 %.
The beeper can be activated [ on ] or de-activated
[ o ] by pressing the arrow key.
Area/volume trip
It is possible to choose up to 9 area trip meters (0 to 8). [ Area 0 ] is a total for
all areas treated. When any of the other areas are used, the treated area and
volume will also be registered automatically in [ Area 0 ].
For reset of [ Area / Volume Trip ], see “Reset of area trip”.
To Next Page
