8 - Technical Specifications
128
Pump Specifications
Pump Model 364/10.0
Pump Capacity
The type signs for the pumps in the previous section show theoretical values only.
The pump performance is impacted by the fluid system it is working within, giving the actual pump the following
approximate performance rates (± 5%).
Pump Capacity Testing
Testing the pump must be carried out according to the international standard ISO 16122-2 or later revisions and substitutes.
μ
ATTENTION! Always conduct scheduled pump capacity tests in accordance with local laws and regulations.
÷
NOTE! Contact your HARDI dealer for more information.
Pump Model Rated RPM Rated Output at 0 Bar
364/10 540 180
To Next Page
Loading...
