What to do if my Harman Kardon Receiver has no sound?
If your Harman Kardon Receiver has no sound, first check the speaker connections and ensure they are secure. Then, adjust the master volume to an audible level. Also, verify that the MUTE button on the remote is not activated. Ensure the speakers are switched on and that you've selected the correct input source. Finally, confirm that all components are connected correctly.
How to troubleshoot a Harman Kardon AVR 134 Receiver that has no power?
If your Harman Kardon Receiver has no power, ensure the AC input cord is securely connected. If it is, check the AC wall outlet by testing it with a lamp or another appliance to make sure the outlet is active.
Why does the remote control unit not operate my Harman Kardon Receiver?
If the remote control isn't working with your Harman Kardon Receiver, first replace the batteries. If that doesn't work, make sure nothing is blocking the remote sensor on the receiver.
What to do if there is no sound from the surround speakers on my Harman Kardon Receiver?
If you're not getting sound from the surround speakers on your Harman Kardon Receiver, make sure a surround mode is selected instead of stereo mode. Adjust both the master volume and surround level to appropriate settings. Ensure that you are using a stereo or surround source, not a monaural one. Lastly, verify that the surround speaker setting is correctly configured.
How to fix poor FM reception on my Harman Kardon AVR 134?
If you're experiencing poor FM reception with your Harman Kardon Receiver, start by connecting an antenna. If an antenna is already connected, try changing its position to improve the signal.
Why is there no sound from the center speaker on my Harman Kardon AVR 134?
If you're not getting any sound from the center speaker on your Harman Kardon Receiver, ensure that a surround mode is selected instead of stereo mode. Check that the center speaker setting is correctly configured. Also, adjust the master volume and center level to suitable settings.
What to do if stations cannot be received on my Harman Kardon Receiver?
If you can't receive stations on your Harman Kardon Receiver, first connect an antenna. Then, tune in the desired station frequency. If you still have issues, try moving the antenna to a different position and retry tuning.
How to stop continuous hissing noise during AM reception on my Harman Kardon AVR 134?
General| Audio Channels | 5.1 |
|---|---|
| Component Video Inputs | 2 |
| Composite Video Inputs | 3 |
| Optical Inputs | 2 |
| Coaxial Inputs | 1 |
| Type | AV Receiver |
| Output Impedance / Channel | 8 ohms |
| Signal-To-Noise Ratio | 100 dB |
| Input Impedance | 47k ohms |
| Input Sensitivity | 200 mV |
| THD | 0.07 % |
| Surround Sound Effects | Dolby Digital, DTS |
| Built-in Decoders | Dolby Digital, DTS |
| Tuner Bands | AM/FM |
| Preset Station Qty | 30 |
| Width | 440 mm |
| Height | 150 mm |
| Video Inputs | 3 composite |
To Next Page
