To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Harman Kardon AVR 158 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Frequency range | 10 - 130000 Hz |
| RMS rated power | 360 W |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.07 % |
| Power output per channel (20-20KHz@8 Ohm) | 60 W |
| HDMI in | 3 |
| PC in (D-Sub) | No |
| Audio (L/R) in | 7 |
| Digital audio optical in | 2 |
| Ethernet LAN (RJ-45) ports | 0 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 1 |
| Headphone connectivity | 6.3 mm |
| Connectivity technology | Wired |
| AM band range | 522 - 1620 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 30 |
| Analog signal format system | PAL |
| Display | VFD |
| Color depth | 12 bit |
| HDMI version | 1.4 |
| Product color | Black |
| Audio decoders | Dolby Pro Logic II |
| Volume control | Digital |
| Digital sound processing | 24 bit |
| Apple docking compatibility | Not supported |
| Sustainability certificates | RoHS |
| On Screen Display (OSD) languages | DEU, ENG |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 540 W |
| Cables included | AC |
Weight and Dimensions| Depth | 385 mm |
|---|---|
| Width | 440 mm |
| Height | 165 mm |
| Weight | 9100 g |
