Name: Harman Kardon AVR245
Brand: Harman Kardon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6-/8-Channel Inputs: Connect the analog audio outputs of a DVD-

Audio, SACD

™

, Blu-ray Disc

™

or HD-DVD

™

player (or any other external

decoder) to these jacks to enjoy these proprietary formats.

Component Video Inputs: If both a video source (e.g., DVD player

or HDTV tuner) and your television or video display have analog compo-

nent video (Y/Pb/Pr) capability, then you may connect the component

video outputs of the source to one of the two component video inputs.

Do not make any other video connections to that source.

Component Video Monitor Outputs: If you are using either

of the Component Video Inputs and your television or video display is

component-video-capable, you may connect these jacks to the corre-

sponding inputs on your video display. You will also need to connect

the composite and/or S-video monitor outputs to your video display

to view the AVR 245’s on-screen displays.

RS-232 Serial Port: This specialized connector may be used with

your personal computer in case Harman Kardon offers a software

upgrade for the receiver at some time in the future.

RS-232 Mode: Leave this switch popped out in the Operate position

unless the AVR 245 is being upgraded.

RS-232 Reset: This switch is only used during a software upgrade.

A standard processor reset is performed by pressing and holding the

front-panel Tone button.

Switched AC Accessory Outlet: You may plug the AC power

cord of one source device into this outlet, and it will turn on whenever

you turn on the receiver. Do not use a source that consumes more than

50 watts of power.

AC Power Cord: After you have made all other connections, plug the

AC power cord into an unswitched outlet.

HKP1477AVR245om 8/29/06 5:45 PM Page 10

AVR245 harman/kardon

Questions and Answers:

Need help?

Do you have a question about the Harman Kardon AVR245 and is the answer not in the manual?

Harman Kardon AVR245 Specifications

General