harman/kardon
Service Bulletin
Service bulletin # H/K2001-008 November 2001
Warranty labor rate: MINOR repair
To: All harman/kardon Service Centers
Model: CDR2
Subject: Mechanical noise from Play section and laser sled stops.
In the event you receive a CDR2 Player/Recorder with this complaint: “There is a mechanical clicking
noise in the player section, either when the CDR2 turns “ON” or when it starts to play a CD”:
1) Clean and re-grease all the mechanical tracking parts:
2 shafts #028/32, laser #025, guide feed #026 tracking motor #029
CDP section exploded view
2) Change R237 on the CDP board from 470Ω to 180Ω.
Location is next to pin 52 of IC201. 180Ω resistor is h/k part # 6044437091.
CDR2 harman/kardon
To Next Page
Loading...
Need help?
General
