Harman AMX DVX Series - Page 128

123
NO Command Syntax Example
Return:
AUDOUT_NAME-<name>
Description:
Requests the output name of the
analog audio port addressed by the
D:P:S.
“'?AUDOUT_NAME '"
Return:
AUDOUT_NAME-AUDIO
OUT1
118 AUDOUT_DUCK_PRIORITY
Command:
SEND_COMMAND <DEV>,
"'AUDOUT_DUCK_PRIORITY-<NONE
|MIC1-MIC14>'"
Return:
AUDOUT_DUCK_PRIORITY-<NONE|
MIC1-MIC14>
Description:
Sets the setting of ducking for the
audio port addressed by the D:P:S.
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’AUDOUT_DUCK_PRIORI
TY-NONE’”
Return:
AUDOUT_DUCK_PRIORITY-
NONE
119 ?AUDOUT_DUCK_PRIORITY
Command:
SEND_COMMAND <DEV>,
"'?AUDOUT_DUCK_PRIORITY'"
Return:
AUDOUT_DUCK_PRIORITY-<NONE|
MIC1-MIC14>
Description:
Requests the current setting of
ducking for the audio port
addressed by the D:P:S.:
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’?AUDOUT_DUCK_PRIOR
ITY’”
Return:
AUDOUT_DUCK_PRIORITY-
NONE