Harman AMX DVX Series - Page 129

124
NO Command Syntax Example
120 HDMIOUT_AUDIO
Command:
SEND_COMMAND <DEV>,
"'HDMIOUT_AUDIO-<OFF|INPUT
PASS-THRU|GROUP 1|GROUP
2|GROUP 3|GROUP 4>'"
Return:
HDMIOUT_AUDIO-<OFF|INPUT
PASS-THRU|GROUP 1|GROUP
2|GROUP 3|GROUP 4>
Description:
Determines which audio output the
HDMI output port addressed by the
D:P:S will use.
port={1-4}
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’HDMIOUT_AUDIO-OFF
’”
Return:
HDMIOUT_AUDIO-OFF
121 ?HDMIOUT_AUDIO
Command:
SEND_COMMAND <DEV>,
"'?HDMIOUT_AUDIO"
Return:
HDMIOUT_AUDIO-<OFF|INPUT
PASS-THRU|GROUP 1|GROUP
2|GROUP 3|GROUP 4>
Description:
Requests which audio output is
currently followed by the HDMI
output port addressed by the D:P:S.
port={1-4}
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’?HDMIOUT_AUDIO’”
Return:
HDMIOUT_AUDIO-OFF
122 DANTEOUT_AUDIO
Command:
SEND_COMMAND <DEV>,
"'DANTEOUT_AUDIO-<OFF|INPUT
PASS-THRU|GROUP 1|GROUP
2|GROUP 3|GROUP 4>'"
Return:
DANTEOUT_AUDIO-<OFF|GROUP
1|GROUP 2|GROUP 3|GROUP 4>
Description:
Determines which audio output the
Dante output port addressed by the
D:P:S will use.
port={1-4}
Command:
SEND_COMMAND
AUDIO_OUTPUT_1,
“’DANTEOUT_AUDIO-OFF
’”
Return:
DANTEOUT_AUDIO-OFF