Harman AMX DVX Series - Page 65

60
NO Command Syntax Example
VIDIN_HDCP-<NONE|HDR10>
Description:
To Set Input HDR Compliant for the
video input port addressed by D:P:S.
Return:
VIDIN_HDR-NONE
17 ?VIDIN_HDR
Command:
SEND_COMMAND <DEV>,
"'?VIDIN_HDR'"
Return:
VIDIN_HDR-<NONE | HDR10>
Description:
To Get Input HDR Compliant for the
video input port addressed by D:P:S.
Command:
SEND_COMMAND
VIDEO_INPUT_1,
“’?VIDIN_HDR’”
Return:
VIDIN_HDR-NONE
18 VIDIN_EDID_DATA
Command:
SEND_COMMAND <DEV>,
"'VIDIN_EDID_DATA-<data>'"
Return:
VIDIN_EDID-<mode>
VIDIN_PREF_EDID-<resolution>
Description:
Sets the EDID data of the input port
with D:P:S. If the EDID data is within
the EDID range of the AMX product,
the mode and resolution to which
EDID belongs will be displayed,
otherwise no response will be
returned.
Command:
SEND_COMMAND
VIDEO_INPUT_1,
“’VIDIN_EDID_DATA-00FF
FFFFFFFFFF0005B800180200
0000...000000000000000000
00000000000000000000000
00000000000000000000000
AB’”
Return:
VIDIN_EDID-4K60
VIDIN_PREF_EDID-4096x216
0p,50
19 ?VIDIN_EDID_DATA
Command:
SEND_COMMAND <DEV>,
"'?VIDIN_EDID_DATA'"
Return:
VIDIN_EDID_DATA-<data>
Description:
Requests the EDID data of the video
input port addressed by D:P:S.
Command:
SEND_COMMAND
VIDEO_INPUT_1,
“’?VIDIN_EDID_DATA’”
Return:
VIDIN_EDID_DATA-00FFFFFF
FFFFFF0005B800180200000
0…000000000000000000000
00000000000000000000000
00000000000000000000AB
20
VIDOUT_SCALE
VIDOUT_RES_AUTO
Command:
SEND_COMMAND <DEV>,
Command:
SEND_COMMAND