Harman AMX DVX Series - Page 75

70
NO Command Syntax Example
47 ?VIDOUT_SLEEP_DELAY
Command:
SEND_COMMAND <DEV>,
“‘?VIDOUT_SLEEP_DELAY '"
Return:
VIDOUT_SLEEP_DELAY-<time>
Description:
Request the sleep delay time for the
video output port addressed by the
D:S:P.
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'?VIDOUT_SLEEP_DELAY '"
Return:
VIDOUT_SLEEP_DELAY-30
48 VIDOUT_COLOR_SPACE
Command:
SEND_COMMAND <DEV>,
“‘VIDOUT_COLOR_SPACE-<RGB|Y
UV444>'"
Return:
VIDOUT_COLOR_SPACE-<RGB|YUV4
44>
Description:
Set the color space for the video
output port addressed by the D:S:P.
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'VIDOUT_COLOR_SPACE-R
GB"
Return:
VIDOUT_COLOR_SPACE-RG
B
49 ?VIDOUT_COLOR_SPACE
Command:
SEND_COMMAND <DEV>,
“‘?VIDOUT_COLOR_SPACE '"
Return:
VIDOUT_COLOR_SPACE
-<RGB|YUV444>
Description:
Request the color space setting on
the video output port addressed by
the D:S:P.
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'?VIDOUT_COLOR_SPACE
'"
Return:
VIDOUT_COLOR_SPACE-RG
B
50 VIDOUT_HDCP
Command:
SEND_COMMAND <DEV>,
“‘VIDOUT_HDCP -<NO
HDCP|HDCP1.4|HDCP2.2|FOLLOW>'
"
Return:
VIDOUT_HDCP -<NO
HDCP|HDCP1.4|HDCP2.2|FOLLOW>
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'VIDOUT_HDCP-NO
HDCP"
Return:
VIDOUT_HDCP-NO HDCP