Harman AMX DVX Series User Manual

71
NO Command Syntax Example
Description:
Set the HDCP compliant on the
video output port addressed by the
D:S:P.
Note: Video output will be blank if
the encryption level of the input is
greater than the selected HDCP
option.
51 ?VIDOUT_HDCP
Command:
SEND_COMMAND <DEV>,
“‘?VIDOUT_HDCP '"
Return:
VIDOUT_HDCP -<NO
HDCP|HDCP1.4|HDCP2.2|FOLLOW>
Description:
Queries the HDCP compliant setting
of the video output port addressed
by the D:S:P.
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'?VIDOUT_HDCP '"
Return:
VIDOUT_HDCP- NO HDCP
52 VIDOUT_CEC_POWER
Command:
SEND_COMMAND <DEV>,
“VIDOUT_CEC_POWER-<ON|OFF>'
"
Return:
VIDOUT_CEC_POWER-<ON|OFF>
Description:
Set power on/off for the sink display
via CEC.
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'VIDOUT_CEC_POWER-OF
F'"
Return:
VIDOUT_CEC_POWER-OFF
53 ?VIDOUT_CEC_POWER
Command:
SEND_COMMAND <DEV>,
“‘?VIDOUT_CEC_POWER'"
Return:
VIDOUT_CEC_POWER-<state>
Description:
Request the current power status
from the sink display via CEC.
state =
{ ON|OFF|WARMUP|COOLDOWN}
Command:
SEND_COMMAND
VIDEO_OUTPUT_1,
“'?VIDOUT_CEC_POWER"
Return:
VIDOUT_CEC_POWER-ON

Harman AMX DVX Series Specifications

General

Brand	Harman
Model	AMX DVX Series
Category	Projector Accessories
Language	English