1-4
RF-5800H 150-WATT COMMUNICATION SYSTEM
GENERAL INFORMATION
1.4 WARRANTY
Harris Corporation guarantees that if the equipment fails from normal use within one year from the date of shipment
due to a defect in workmanship or materials, Harris will repair or replace the equipment at no charge. Repairs made
by Harris to the equipment under this warranty are warranted to be free from defects in material and workmanship
for 60 days from the date of repair.
For information on how to process a claim under this warranty, and on what is not covered by this warranty, refer to
the warranty information printed on the inside front cover of this manual.
1.5 GENERAL SYSTEM DESCRIPTIONS
Table 1-1 identifies the RF-5800H 150-Watt Communication System configurations. Paragraph 1.5.1 through
Paragraph 1.5.3 describes the configurations.
1.5.1 RF-5800H 150-Watt Vehicular System
Figure 1-3 shows the relationship of the units contained in the RF-5800H 150-Watt Vehicular System and Figure 1-4
is the family tree. This system contains an RF-5833H-PA 150-Watt Power Amplifier (herein after referred to as
RF-5833H-PA), and a RF-5073VSM Shock Mount Assembly. The RF-5800H-MP Manpack Radio (herein after
referred to as RF-5800H-MP), and RF-382A Automatic Antenna Coupler (herein after referred to as RF-382A) are
ordered separately. The RF-5245 Internal Pre/Postselector and the external 25 MHz Lowpass Filter Kit are provided
with the RF-5800H-V002 configuration. See Figure 1-5.
1.5.2 RF-5800H 150-Watt Base Station System
Figure 1-6 shows the relationship of the units contained in the RF-5800H 150-Watt Base Station System and
Figure 1-7 is the family tree. Figure 1-8 is the family tree for the RF-5800H 150-Watt Base Station System with the
Pre/Postselector and the external 25 MHz Lowpass Filter Kit installed. These systems contain an RF-5833H-PA, an
RF-5051PS Power Supply (herein after referred to as RF-5051PS) and a RF-5033 Stack Bracket Assembly for the
RF-5833H-PA. The RF-5800H-MP and RF-382A are ordered separately. The RF-5245 Internal Pre/Postselector
(part of the power amplifier) and the external 25 MHz Lowpass Filter Kit are provided with the RF-5800H-B002
configuration.
Table 1-1. RF-5800H 150-Watt Communication System Configurations
Part Number Description
RF-5800H-V001 RF-5800H 150-Watt Vehicular System
RF-5800H-V002 RF-5800H 150-Watt Vehicular System with
Pre/Postselector and 25 MHz Lowpass Filter
RF-5800H-B001 RF-5800H 150-Watt Base Station System
RF-5800H-B002 RF-5800H 150-Watt Base Station System
with Pre/Postselector and 25 MHz Lowpass
Filter
RF-5800H-TM001 RF-5800H 150-Watt Transit Case System
RF-5800H-TM002 RF-5800H 150-Watt Transit Case System
with Pre/Postselector and 25 MHz Lowpass
Filter
To Next Page
Loading...
