2-1
RF-5800H 150-WATT COMMUNICATION SYSTEM
INSTALLATION
CHAPTER 2
INSTALLATION
2.1 INTRODUCTION
This chapter describes the following:
• Site information - Paragraph 2.2
• Tools and materials required - Paragraph 2.3
• Unpacking and repacking - Paragraph 2.4
• Equipment installation - Paragraph 2.5
• Installation checkout - Paragraph 2.6
2.2 SITE GUIDELINES
The information contained here provides general guidelines for setting up the various RF-5800H 150-Watt
Communication System configurations. In general, select a well ventilated location. Avoid placing the system in a
busy or congested area, or where there is excessive noise. The following are general site considerations:
• Availability of power source, earth ground, antenna, etc.
• Ease of operation, maintenance, or removal and replacement
• Ventilation
• Clearance of cable connections
• Stable surface to mount equipment
2.2.1 General Guidelines
The information contained in the following paragraphs provides general site guidelines. Before choosing a location,
become familiar with the dimensions of the equipment and mounting brackets, and make sure there is sufficient
room for maintenance when the radio system is installed.
2.2.1.1 Grounding
The following paragraphs suggest grounding guidelines that should be followed when performing vehicular or base
station installations.
WARNING
Inadequate or defective grounding presents a personnel
hazard that could result in injury or death.
CAUTION
Inadequate or defective grounding could damage the
equipment.
To Next Page
Loading...
