4
GENERAL INDICATIONS/SAFETY REGULATIONS
Harwi Holland B.V. has bestowed great care
on compiling this manual. Before operating the
machine read the complete manual carefully.
Persons under the age of 18 are not allowed to
work on or with circular sawing machines.
Except for a training program on a legal basis.
The machine may only be operated by
educated personnel or under supervision of
educated personnel.
To avoid touching with rotating saw-blades
make sure that:
Clothing fits tightly to the body
Work with closed fingers
No rings or other jewellery are worn.
A hairnet is used by long hair.
Be careful when changing the saw-blades.
They are sharp and cause injuries.
Do not remove woodchips when the saw-blade
is running. Stop the machine first.
Broken saw-blades or blades or deformed
blades are not to be used. Neither are HSS
blades
The applied saw-blade is to be used and
sharpened according to the directions of the
manufacturer.
Sharpening only by competent craftsmen.
Stick to max. admissible r.p.m. mentioned on
the blade. Preferably use noise-reduced saw-
blades.
Flexible hoses of the dust extractor have to be
from a highly inflammable quality (according to
DIN 4102).
The safety guard and other safety equipment
may not be removed or put out of order.
Assembling or repairs are only to be performed
if the machine cannot be switched on. The
switch or the main switch are to be switched off
and locked with for instance a padlock.
Repairs to the electricity supply are only to be
executed by skilled craftsmen.
When leaving the working area make sure that
incompetent persons cannot switch on the
machine. It is obligatory to wear dust-mask, ear
protection and safety glasses.
Take care of a clean working area.
The machine has to be lighted. When using
strip lighting take into account the stroboscopic
effect. A rotating saw-blade seems to be
standing still.
To Next Page
Loading...