4
GENERAL INDICATIONS/SAFETY REGULATIONS
Harwi Holland B.V. has bestowed great care on
compiling this manual. Before operating the
machine read the complete manual carefully.
Person under the age of 18 are not allowed to
work on or with circular machines, except for a
training program on a legal basis. The machine
may only be operated by educated personnel or
under supervision of educated personnel.
To avoid touching with rotating saw-blades
make sure that:
clothing fits tightly to the body
work with closed fingers
no rings or other jewellery are worn
a hairnet is used by long hair
Be careful when changing the saw-blades.
They are sharp and can cause injuries.
Do not remove woodchips when the saw-blade
is running. Stop the machine first. Broken saw-
blades or deformed blades are not to be used.
Neither are HSS blades.
The applied saw-blade is to be used and
sharpened according to the directions of the
manufacturer. Sharpening only by competent
craftsmen.
Stick to max. admissible r.p.m. mentioned on
the blade. Preferably use noise-reduced saw-
blades.
Take care of proper support when cutting long
are large material.
Flexible hoses of the dust extractor have to be
of a highly inflammable quality (according to
DIN 4102).
The safety guard and other safety equipment
may not be removed or put out or order.
Assembling or repairs are only to be performed
if the machine cannot be switched on. The
switch or the main switch are to be turned off
and locked with for instance a padlock.
Repairs to the electricity supply are only to be
executed by skilled craftsmen.
When leaving the working area make sure that
the machine cannot be switched on by
incompetent persons. It is obligatory to wear a
dust-mask, ear protection and safety glasses.
Take care of a clean working area.
The machine has to be lighted. When using
strip lighting take into account the stroboscopic
effect. A rotating saw-blade seems to be
standing still.
To Next Page
Loading...
