9
OPERATING THE MACHINE
SQUARE MITRING TO THE FENCE
1 Move the carriage to the front.
2 Fasten the carriage with the blocking
knob, on top of the unit.
3 Turn the saw unit downwards with the
handle on top of the carriage (Fig. 2).
4 The bottom side of the measure pointer
has to be approx. 2 mm under 0 mm.
5 Loosen the blocking knob on top of the
carriage.
6 Let the carriage run backwards behind the
stop.
7 The machine is ready for cutting.
Figure 2
0
1
2
3
4
5
6
7
8
9
10
To Next Page
Loading...