HARWI 625-U - MAINTENANCE: PERIODIC TASKS; CLEANING, LUBRICATING, GREASING; MAINTENANCE AT 40 HOURS; MAINTENANCE AT 160 HOURS

18
MAINTENANCE
CLEANING, LUBRICATING AND
GREASING
40 PRODUCTIVE HOURS
Perform following maintenance every 40
productive hours.
1 Clean tracks of the horizontal slideway.
Lubricate slightly.
2 Clean the spindle of the height
adjustment. Grease slightly.
3 Clean the rotating unit at the backside of
the machine (625-U). Grease slightly.
4 Clean the bearings of the carriage.
160 PRODUCTIVE HOURS
Perform following maintenance every 160
productive hours.
5 Wear and tear of cables.
6 Broken or torn parts of the electric circuit.
7 Brake time of saw-blade (= less than 10
seconds).
8 Operations and state of maintenance of
the guard and its fixation.
9 Check dust outlet for free passage.
1000 PRODUCTIVE HOURS
Perform following maintenance every 1000
productive hours.
10 Check tolerance of saw spindle.
11 Check bolt and nut connections of motor.