Phase monitor: Heat exchangers include a phase monitor. Refer to the fault indicators provided on
the phase monitor and contact a licensed electrician to correct any faults.
Connection to Outdoor Chiller
Purpose: Some heat exchanger systems come with a Haskris outdoor chiller. For these systems, the
heat exchanger must be wired to the chiller to ensure that Haskris will get remote notifications of
heat exchanger faults.
Installation: A 150ft (45.7m) cable is provided for this connection. Connect the provided cable to the
orange terminal strip in the chiller’s electrical box. Connections are 1-to-1 and are labeled.
To Next Page
Loading...
