38
Manual film speed setting.
220 film length setting.
Data imprinting setting.
‘Frames remaining’
counter setting.
Data imprint setting
Data imprinting can be activated or deactivated through the maga-
zine menu.
To access data setting:
1) Ensure the magazine settings lock is in the unlocked position.
2) Press the
button until the Data symbol appears.
3) Press either the
or the
button to reach On or Off.
4) The new setting will be saved automatically after a time out of
five seconds.
5) Return the magazine settings lock to the locked position.
Operation and changes made to the data imprinting function are
accessed through the camera menu. Please see separate section
for full details.
Frame counter setting
e frame counter can be set to show either how many unexposed
frames remain on a film or how many frames have already been
exposed. e LCD shows your choice of setting by adding the
word Remain as a reminder of the number of frames remaining or
‘countdown’. Absence of this word implies the opposite, namely,
‘count-up’, so it denotes the number of the next frame to be used
(for example, the figure 4 means three frames have already been
exposed). is information is also automatically displayed on the
grip LCD and viewfinder LCD though only as a figure above a
symbol.
To access frame counter setting:
1) Ensure the magazine settings lock is in the unlocked position.
2) Press the
button until Remain appears.
3) Press either the
button or the
button to reach the desired
setting (toggle function).
‘on’ will show the number of frames remaining
‘oFF’ will show the number of the next frame.
4) The new setting will be saved automatically after a time out of
five seconds.
5) Return the magazine settings lock to the locked position.
Low-battery symbol
e low-battery symbol only appears on the magazine LCD when
the battery needs changing.
Example
In the example shown here:
• 120 film length set manually
• the film speed (ISO160) has been set manually
• 5 frames have already been exposed (therefore with regular
120 film, 11 frames remain)
• the battery is functional
To Next Page
Loading...
Need help?
General
