73
System Status
4.4 System Status
Check component usage for servicing reasons as follows:
1) Press the MENU button on the grip.
2) Turn the front control wheel until Settings appears.
3) Press the DRIVE (Enter) button on the grip.
4) Turn the front control wheel to access Info.
5) Press the Enter (DRIVE) button
6) Press the Enter (DRIVE) button. The display now shows a
list of camera components and to the right of each individual
component a figure that represents the number of actions
taken by that component. Please note that even a completely
new camera will have registered actions as these occur dur-
ing testing before delivery.
7) Press the Next (DRIVE) button to display the software ver-
sion for each item.
2
4
6
To Next Page
Loading...
