64
Settings / Custom Options
options available
CUSTOM OPTIONS
4 Settings
From the Settings screen you can access four main sub-settings: Custom
options, Image Info, Date & Time and System status by turning the
front control wheel. From each of these four sub-settings you can access
further screens. Custom options has more than 25 screens, Image Info
has two more screens each with more choices, Date & Time has one more
screen and System status has two more screens. Look at the main menu
chart to get an idea of where all the options are on the menu tree
4.1 Custom options
1) Press the MENU button on the grip.
2) Turn the front control wheel until Settings appears.
3) Press the DRIVE (Enter) button on the grip.
4) Turn the front control wheel to access 4.1 Custom options.
5) Press the DRIVE (Enter) button to access the more than 25
choices available.
6) Turn the front control wheel to the desired Option.
7) Turn the rear control wheel to the desired Setting.
8) Press Save
As shortcuts, press MENU and then the USER button to instantly
go to Custom Option level. Press the shutter release button to save
the new setting.
In the following list, the options marked in red are the default settings. So,
in the case of the User button, for example, as None is the default there
will be no reaction from the camera until you make a specific choice and
save it.
If you want to reset the camera back to the default setting for all options,
press the ON.OFF button quickly to enter Profiles, select Standard and
then press Load.
Please also note that some of the button functions are only available
when a digital back is fitted (Histogram (displays last histogram) • Grey
balance exposure • Delete last image • Dig. foc. check)
1 2
3
4
5
6
7
To Next Page
Loading...
Need help?
General
