60
Self timer setting
The Self timer function is set in the following manner:
1) Press the MENU button on the grip.
2) Turn the front control wheel until Self Timer appears.
3) Press ENTER (DRIVE button) on the grip.
4) Turn the front control wheel to access the options, that are:
Delay
Mirror sequence
Mirror Up / Mirror Goes Down
(A drop shadow will be displayed beneath the selected symbol,
for example
)
5) When Delay is highlighted - - turn the rear control wheel
to choose a delay range from 2 - 60s in 1s intervals.
6) Turn the front control wheel again to choose Delay / Mirror
Up, Mirror Up/ Delay sequence -
. When highlighted
turn the rear control wheel to choose.
Delay / Mirror Up sequence =
Delay for set amount of time — mirror raised — exposure made.
Mirror Up/ Delay sequence =
Mirror raised — delay for set amount of time — exposure made.
7) Turn the front control wheel again for
Mirror goes down / Mirror remains up -
.
- choice.
Turn the rear control wheel to choose.
Mirror goes down =
Mirror returns to its normal position and the next film frame
is advanced.
Mirror raised =
Mirror remains in raised position. No image is visible in the
viewfinder until M UP button pressed.
8) Press On (AF button). Note that this now reads Off and the
line of text at the bottom of the screen reads ‘Self timer on’.
9) Press SAVE (DRIVE button) to save the setting.
10) Press ENTER (DRIVE button) again from the Self Timer
screen to activate the function.
11) Click On (AF button).
12) Half-press the shutter release button to standby mode for this
function (press the shutter release button again (full press)
for activation) or full-press the shutter release for immediate
activation.
Check the lower text-row on the screen for ON or OFF status.
You can halt the sequence by clicking the ON / OFF ( ESC ) button.
1 2
3
4
5
6
7
8
9
10
11
12
‘Delay’ highlighted with drop
shadow. 10 seconds chosen.
To Next Page
Loading...
Need help?
General
