Hasselblad H3D 31MPix - Func Tion Selec Tor; Film Plane Index; Dark Slide Key; Film Tab Holder

The HM 16-32 Film Magazine is an optional accessory.
Function selector E
Selects the four functions that can be changed on the magazine.
e functions are on a menu loop so that repeated pressing of the
selector button will successively access all functions in turn. Aer
a time-out of ve seconds of non-activity, the display returns to
the main screen.
 Changes can only be made when the settings lock switch is in
the unlocked position.
Film plane index F
Provides a measuring point for the actual position of the lm plane
in the magazine. Used for calculations in critical applications.
Darkslide key G
Withdraws and replaces the darkslide. Fold out the key and turn it
counter-clockwise 360° (towards the open symbol) to withdraw it
and clockwise 360° (towards the closed symbol) to replace it.
 The darkslide can only be withdrawn when the magazine is
attached to the camera.
Darkslide indicator H
Indicates whether the darkslide is in place or withdrawn:
RED = stop ! = exposure CANNOT be made
(magazine can be removed from camera)
WHITE = ok ! = exposure CAN be made
(magazine cannot be removed from camera)
If you attempt to make an exposure when the darkslide is closed,
however, you will receive a warning message in the viewnder
and grip LCDs – ‘e darkslide is closed’.
Film tab holder I
Holds an ID tab from the lm roll pack as a reminder of the type
of lm loaded. Don’t forget to change it if you change lm type!
Film holder key J
Secures the lm holder in the magazine. Fold out the key and
turn counter-clockwise 90° to remove the lm holder and turn
clockwise 90˚ to lock the lm holder in place.
Magazine settings lock K
All settings can be locked to avoid inadvertent changes. To change
the settings, slide the settings lock (see illus) to the right until it
stops. Aer the changes have been made, slide the settings lock
to the le (see symbol on magazine) again to secure the new set-
tings.
Databus interface L
Data interface between magazine and camera. Ensure the contacts
are kept clean and protected from damage. Keep the protective
cover on when the magazine is being stored or transported.
JI
K L
HG
117
F
E